Log In

Log In

Forgot Your Password?

Cart Subtotal: $0.00

Hexagon Metrology Multi-CMM Air Dryer / Filter (110V)

SKU: H007621

Be the first to review this product

Availability: In stock


Quick Overview

Hexagon Metrology - H007621 - Multi-CMM Air Dryer / Filter (110V)

Click main image to zoom & pan

Hexagon Metrology - H007621 - Multi-CMM Air Dryer / Filter (110V)


The main cause of unplanned CMM maintenance is air line and air bearing fouling from water, oil and contaminants in the compressed air lines. This Multi-CMM Filtration System maintains accuracy for up to 4 CMM's while reducing downtime and expensive repairs. The system works by drying air and removing oil and other contamination before entering CMM air lines and air bearings. This system is a high-performance replacement for the standard filters found on most CMMs.

This item also includes a Condensation Collection Kit containing a 1 Quart drain tank reservoir with 1/4 turn ball valve for draining accumulating water/oil condensate plus fittings.


  • Removes water and oil down to 10 microns.
  • Removes oil mist and aerosols down to .01 microns.
  • Removes oil vapor down to .003 ppm (parts per million).
  • Dew points down to -27° C.
  • Relative humidity down to .01% rH.
  • IP65 Rated programmable auto drain ejects oil and water (timer controlled).
  • The system is rated up to 35 CFM.
  • The system exceeds Class 4 ISO 8573-1:2010 Compressed Air Contaminants and Purity Classes.


  • Height: 718mm (28.3 inches)
  • Width: 628mm (25.4 inches)
  • Depth: 200mm (7.9 inches)
  • Weight: 54 lbs. (total system shipping weight is 78 lbs.)
  • Wall Mountable

Environmental requirements:

  • The system must be operated in an environment ranging from 0-65° C.
  • The system must be mounted in a vertical position.

Safety considerations:

  • System pressure must be released prior to any installation or service.
  • Adequate mounting hardware must be supplied based on the type of wall material (cement, sheet rock, etc.).


The system comes with a 90 day warranty against factory defect.

The Filter Elements and O-rings must be replaced every 6 months in order to maintain the warranty. You can purchase the H007625 Maintenance Kit by clicking Here.

Instructions for Use:

Click Here to download.



Additional Info

SKU H007621
Hexagon Metrology

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.